### BEGIN DEBCONF SECTION
# XF86Config-4 (XFree86 server configuration file) generated by dexconf, the
# Debian X Configuration tool, using values from the debconf database.
# Edit this file with caution, and see the XF86Config-4 manual page.
# (Type "man XF86Config-4" at the shell prompt.)
# If you want your changes to this file preserved by dexconf, only make changes
# before the "### BEGIN DEBCONF SECTION" line above, and/or after the
# "### END DEBCONF SECTION" line below.
# To change things within the debconf section, run the command:
#   dpkg-reconfigure xserver-xfree86
# as root.  Also see "How do I add custom sections to a dexconf-generated
# XF86Config or XF86Config-4 file?" in /usr/share/doc/xfree86-common/FAQ.gz.
Section "Files"
      FontPath "unix/:7100"
       # local font server
       # if the local font server has problems, we can fall back on these
      FontPath "/usr/lib/X11/fonts/misc"
      FontPath "/usr/lib/X11/fonts/cyrillic"
      FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
      FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
      FontPath "/usr/lib/X11/fonts/Type1"
      FontPath "/usr/lib/X11/fonts/Speedo"
      FontPath "/usr/lib/X11/fonts/100dpi"
      FontPath "/usr/lib/X11/fonts/75dpi"
      FontPath "/usr/lib/X11/fonts/TrueType"
      FontPath "/usr/lib/X11/fonts/PCF"
EndSection
Section "Module"
      Load "GLcore"
      Load "bitmap"
      Load "dbe"
      Load "ddc"
      Load "dri"
      Load "extmod"
      Load "freetype"
      Load "glx"
      Load "int10"
      Load "pex5"
      Load "record"
      Load "speedo"
      Load "type1"
      Load "vbe"
      Load "xie"
      Load "pex"
EndSection
Section "ServerFlags"
    # Uncomment this to cause a core dump at the spot where a signal is
    # received.  This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging
    #NoTrapSignals
    # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.
    #DontZap
    # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
    # sequences.  This allows clients to receive these key events.
    #DontZoom
    # This  allows  the  server  to start up even if the
    # mouse device can't be opened/initialised.
    AllowMouseOpenFail
EndSection
Section "InputDevice"
    Identifier "Keyboard1"
    Driver      "Keyboard"
    Option "AutoRepeat"  "250 30"
    Option "XkbRules" "xfree86"
    Option "XkbModel" "pc104"
    Option "XkbLayout" "us_intl"
EndSection
Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse"
        Option      "Device" "/dev/input/mice"
        Option      "Protocol" "IMPS/2"
        Option      "Emulate3Buttons" "off"
        Option      "ZAxisMapping" "4 5"
Option      "SampleRate" "60"
Option      "BaudRate" "1200"
Option      "Resolution" "100"
EndSection
Section "InputDevice"
    Identifier  "Mouse1"
    Driver      "mouse"
    Option "Protocol"    "PS/2"
    Option "Device"      "/dev/psaux"
    Option "ZAxisMapping" "4 5"
    Option "Emulate3Buttons" "yes"
# ChordMiddle is an option for some 3-button Logitech mice
#    Option "ChordMiddle"
EndSection
Section "Device"
    Identifier  "ATI Radeon"
    VendorName  "Unknown"
    BoardName   "Unknown"
    Driver      "radeon"
#    VideoRam    8192
    # Clock lines
    # Uncomment following option if you see a big white block
    # instead of the cursor!
    #    Option      "sw_cursor"
    Option      "AGPMode"  "1"
    Option      "DPMS"  "on"
EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
    Identifier "Compaq|Compaq Presario 150"
    VendorName "Compaq"
    ModelName  "Unknown"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
    HorizSync  31-49
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
    VertRefresh 48-80
# This is a set of extended mode timings typically used for laptop,
# TVullscreen mode or DVD fullscreen output.
# These are available along with standard mode timings.
# Sony Vaio C1(X,XS,VE,VN)?
# 1024x480 @ 85.6 Hz, 48 kHz hsync
ModeLine "1024x480"    65.00 1024 1032 1176 1344   480  488  494  563 -hsync -vsync
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576"     50.00  768  832  846 1000   576  590  595  630
# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576"     63.07  768  800  960 1024   576  578  590  616
EndSection
Section "Screen"
    Identifier "screen1"
    Device      "ATI Radeon"
    Monitor     "Compaq|Compaq Presario 150"
    DefaultColorDepth 24
    Subsection "Display"
        Depth       24
        Modes       "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
EndSection
Section "ServerLayout"
    Identifier "layout0"
    Screen     "screen1"
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Mouse1" "AlwaysCore"
    InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "DRI"
Mode
0666
EndSection
### END DEBCONF SECTION