Julien MARY <julien.mary@free.fr>
Compaq Evo N160
On my Compaq Evo N160 I have installed the Debian 3.0 Linux distribution.
I haven't made any test about PCMCIA
General system information:
Linux noosphere 2.4.18 #1 ven nov 15 23:42:41 CET 2002 i686 unknown
processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 11 model name : Intel(R) Pentium(R) III Mobile CPU 1200MHz stepping : 1 cpu MHz : 1196.037 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse bogomips : 2385.51
Système de fichiers 1k-blocs Utilisé la capacité disponible% Monté sur /dev/hda1 186663 37195 139831 22% / /dev/hda6 2063504 730912 1227772 38% /usr /dev/hda7 2063504 522944 1435740 27% /usr/local /dev/hda8 241116 203609 25059 90% /var /dev/hda9 3107092 146720 2802536 5% /home /dev/hda10 241116 4176 224492 2% /tmp /dev/hda11 1407232 80468 1255280 7% /opt /dev/hda12 3020140 1904876 961848 67% /deb /dev/hda13 2008080 32828 1873244 2% /archive /dev/hda14 8056492 2512648 5134592 33% /mnt/recup
Disk /dev/hda: 255 heads, 63 sectors, 3648 cylinders Units = cylinders of 16065 * 512 bytes Device Boot Start End Blocks Id System /dev/hda1 * 1 24 192748+ 83 Linux /dev/hda2 25 2884 22972950 5 Extended /dev/hda3 * 2885 3648 6136830 7 HPFS/NTFS /dev/hda5 25 74 401593+ 82 Linux swap /dev/hda6 75 335 2096451 83 Linux /dev/hda7 336 596 2096451 83 Linux /dev/hda8 597 627 248976 83 Linux /dev/hda9 628 1020 3156741 83 Linux /dev/hda10 1021 1051 248976 83 Linux /dev/hda11 1052 1229 1429722 83 Linux /dev/hda12 1230 1611 3068383+ 83 Linux /dev/hda13 1612 1865 2040192 83 Linux /dev/hda14 1866 2884 8185086 83 Linux
/dev/hda: Model=IC25N030ATCS04-0, FwRev=CA3OA71A, SerialNo=CSH301D3GDDLAB Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4 BuffType=DualPortCache, BuffSize=1768kB, MaxMultSect=16, MultSect=16 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=58605120 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5 AdvancedPM=yes: mode=0x80 (128) WriteCache=enabled Drive Supports : ATA/ATAPI-5 T13 1321D revision 3 : ATA-2 ATA-3 ATA-4 ATA-5
Output from lspci
:
00:00.0 Host bridge: Intel Corp.: Unknown device 3575 (rev 02) 00:01.0 PCI bridge: Intel Corp.: Unknown device 3576 (rev 02) 00:1d.0 USB Controller: Intel Corp.: Unknown device 2482 (rev 01) 00:1d.1 USB Controller: Intel Corp.: Unknown device 2484 (rev 01) 00:1e.0 PCI bridge: Intel Corp. 82820 820 (Camino 2) Chipset PCI (-M) (rev 41) 00:1f.0 ISA bridge: Intel Corp.: Unknown device 248c (rev 01) 00:1f.1 IDE interface: Intel Corp.: Unknown device 248a (rev 01) 00:1f.3 SMBus: Intel Corp.: Unknown device 2483 (rev 01) 00:1f.5 Multimedia audio controller: Intel Corp. AC'97 Audio Controller (rev 01) 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M6 LY 02:04.0 Communication controller: Conexant HSF 56k HSFi Modem (rev 01) 02:05.0 FireWire (IEEE 1394): Texas Instruments: Unknown device 8023 02:06.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller (rev 01) 02:08.0 Ethernet controller: Intel Corp. 82801CAM (ICH3) Chipset Ethernet Controller (rev 41)
Output from pnpdump
:
# $Id: pnpdump_main.c,v 1.27 2001/04/30 21:54:53 fox Exp $ # Release isapnptools-1.26 # # This is free software, see the sources for details. # This software has NO WARRANTY, use at your OWN RISK # # For details of the output file format, see isapnp.conf(5) # # For latest information and FAQ on isapnp and pnpdump see: # http://www.roestock.demon.co.uk/isapnptools/ # # Compiler flags: -DREALTIME -DHAVE_PROC -DENABLE_PCI -DHAVE_SCHED_SETSCHEDULER -DHAVE_NANOSLEEP -DWANT_TO_VALIDATE
Output from setserial
:
/dev/ttyS0, Line 0, UART: 16550A, Port: 0x03f8, IRQ: 4 Baud_base: 115200, close_delay: 50, divisor: 0 closing_wait: 3000 Flags: spd_normal skip_test /dev/ttyS1, Line 1, UART: unknown, Port: 0x02f8, IRQ: 3 Baud_base: 115200, close_delay: 50, divisor: 0 closing_wait: 3000 Flags: spd_normal skip_test /dev/ttyS2, Line 2, UART: unknown, Port: 0x03e8, IRQ: 4 Baud_base: 115200, close_delay: 50, divisor: 0 closing_wait: 3000 Flags: spd_normal skip_test /dev/ttyS3, Line 3, UART: unknown, Port: 0x02e8, IRQ: 3 Baud_base: 115200, close_delay: 50, divisor: 0 closing_wait: 3000 Flags: spd_normal
This document has nothing to do with Compaq, they don't even know it exists. There is no guarantee that the information on this page is accurate, please don't hold me responsible if your experience is different from the information here.
This report was generated by lanoche
v0.6 mar nov 19 16:06:28 CET 2002.
The latest version of lanoche
is
available at MobiliX - Software.